I wanted to make a fleece loungewear set similar to what I’ve been seeing from retailers lately. I started with the fleece wide-leg pants, and then debated about what top to make. I knew I wanted a sweatshirt-style top, but I wanted it to be a bit oversized, but not too long, and I wanted it to have a kangaroo pocket. I liked the fit of the Greenstyle Surge top I just made, although I didn’t want it to be quite that oversized and I wanted a different neck. So I took a look at the other Greenstyle top patterns and decided to try the Bianca Pullover. There’s a nice blog post with lots of Biancas on the Greenstyle website.

The Bianca pattern uses a different odd size scheme than Surge. This time my measurements suggested I was somewhere between D and E. Given the bulky nature of my fabric and the fact that the kangaroo pocket looked too small in the D size, I went with E. The only changes I made were shortening both the sleeves and the bodice by 1 inch.

Bianca was pretty easy and quick to sew, but the instructions were rather minimal. For an experienced sewist, this was fine, but the pattern might be more intimidating than it needs to be for beginners because it doesn’t explain what type of stitch to use where, when you should top stitch, etc. I decided to use a shallow zigzag (1.8 length, 1.1 width) for all my top stitching since this is a pretty stretchy fabric and I don’t want my seams to pop. The pattern specifies a 3/8-inch seam allowance, so I trimmed 1/8-inch as I serged most of the seams. This works, but I prefer knit patterns with 1/4-inch seam allowances so trimming isn’t necessary. I ended up sewing the neckband on with 1/4-inch seam allowance and not trimming because I didn’t want to make the neck band any narrower than it was already.

I’m very pleased with how the top came out, and I love how the complete lounge set works together. It is super comfy and cozy, and I even went outside in the snow for a photo shoot (we got over a foot of snow the day before). I will probably make more Biancas. It’s a great drop shoulder top that looks and feels roomy, but not enormous. For less bulky fabric I might go down to size D (but might keep the size E kangaroo pocket). It has options for a hood, side pockets, and for sewing with and without bands. Most commercial sweatshirts with kangaroo pockets also have hoods and I love the fact that when I sew my own clothes I can make it the way I want it with a kangaroo pocket and no hood.

Here’s a photo of a fleece lounge set from a retailer and some more photos of my lounge set.

Greenstyle Surge Sweatshirt, size C2 regular length, sleeves shortened by 2 inches, in 1 yard black Polartec Windpro ribbed fleece.

When Kayla Tarey hacked the Greenstyle Sav’s sweatshirt pattern into an oversized sweatshirt suitable for a heavy, low-stretch knit, I wanted to try it too. Kayla used Surge Fabric’s Polartec Wind Pro ribbed sweater fleece, which is 100% Polyester, 380gsm, with 25% horizontal and 0 vertical stretch. It has a 2×2 rib knit on the front side and soft sherpa fleece on the back. This seemed perfect for a cold-weather sweater. The folks at Greenstyle turned Kayla’s hack into the Surge Sweatshirt pattern, making it much easier for everyone to copy this style. The pattern works for a variety of knit fabrics, but because it doesn’t have a neck band and the bottom band and cuffs don’t require a lot of stretch, it works fine for heavy 2-way stretch fabric that doesn’t have a lot of stretch. I had 2 yards of black Wind Pro and decided to try it out.

I projected the pattern and cut it out. Kayla had suggested checking the projector calibrations on the fabric because it is so thick. I measured some of the projected pattern pieces with both one layer of fabric and two and noticed only minimal differences between the size of the projection on the fabric and on the cutting mat without any fabric. I also found the fabric cuts quite easily with a rotary cutter.

GreenStyle has unusual sizing, and the size chart for this pattern said I was mostly a size C2, but a B1 at the bust. This was my first Greenstyle pattern so I wasn’t entirely sure what to do, but as this is supposed to be an oversized pattern and the fabric is hefty, I decided to go with the bigger size. I debated grading parts of it down or shortening it, but ultimately decided to only shorten the sleeves with my usual 2-inch adjustment. Amazingly, I was able to cut the whole thing from just 1 yard of fabric! I think this is because the drop sleeves are actually pretty short since part of their length comes from the width of the bodice. Now I unexpectedly have an extra yard of this fabric to make a sweater for someone else.

Most of the sweatshirt came together pretty quickly. The pattern has a 3/8-inch seam allowance so I trimmed 1/8-inch off with my serger as I sewed. My Triumph serger was able to sew and trim the heavy fabric without a problem. I used my sewing machine to join the seams on the bands and cuffs. I basted the bottom band and the cuffs to the shirt with a long zigzag stitch after stretching them (just a little bit) and pinning in place. I was able to easily serge the bottom band through three layers of fabric, but the cuffs were too bulky to get under my serger foot. Perhaps I could have made it work if I switched to a smaller foot (I have all the feet so there was probably something that would have worked), but I decided to just sew them with a zigzag on my sewing machine. The neck band construction looks complicated but is actually pretty easy, and is sewn on a sewing machine and finally attached with a serger. It has a cute little notch on one side that nobody will ever see because my hair hides it, but maybe if I wear a ponytail, it will show.

The finished shirt is definitely oversized, but not too oversized. It is very warm and comfortable. I find a lot of turtlenecks and cowls uncomfortable, but this neck band stands far enough away from my neck that it doesn’t bother me. I almost didn’t make this shirt because I didn’t want a high neck. I debated trying a V-neck, a quarter zip, or a scoop neck with facing, but eventually decided to just make the pattern as written, and I’m glad I did.

If I were making this out of a lighter-weight fabric I might go down a size or two, and I might also try this a few inches shorter, or use the pattern for the cropped version and make it a few inches longer. The pattern also has optional pintuck accents that I did not use. I think it looks better without them. Or maybe I would try the Greenstyle Bianca pullover pattern, which is less oversized, has a similar shape, but comes with neck and pocket options. It’s going to be cold here for a while and I have more cozy fabric in my stash, so let’s see!

I made this shirt yesterday and wore it to work today. I walked to work in single-digits and with a coat on top it did the job!