After my success with the relatively simple Harper cardigan, I decided to try the fancier Sinclair Laura relaxed-fit shawl-collar cardigan. Except I don’t like shawl-collar cardigans because I don’t like how they feel on my neck, so I decided to make a shawless shawl-collar cardigan. The reason I selected the Laura cardigan despite the fact that I obviously don’t like its primary feature, is that it has a really cool peplum in the back. Besides looking cool, the peplum is created by cutting the fabric on a tight curve and attaching the inner curve to the bottom of the bodice, creating a sort of flounce effect with no need to gather or pleat. Cool!

I hacked the size 4P Laura cardigan by reducing the shawl color to a 1-inch band. That would have made the front pieces too narrow to meet in the middle, so I used the Harper pattern as a template to draft wider front pieces, except I left the Laura shoulders and blended it together. I also wasn’t a fan of the handkerchief hem, so I rounded the square corners. In hindsight I should have just lopped off the front dangling part completely (which I saw another sewist do in the Sinclair Facebook group), which would also have made for a smoother front line as it avoids the 45 degree turn in the front binding. The cardigan is supposed to be made with a closure at the point that the 45 degree turn in the binding occurs. The closure helps straighten everything out. But I didn’t want a closure so left that out.

The Laura pockets are very cool — they form cute little pocket bags that are big enough for my iPhone, although depending on the fabric you use they may sag if you put an iPhone in them.

I used a poly-rayon impressionist double sweater knit fabric from Surge Fabric shop in the tea leaf color way. This fabric is a loose, fairly light-weight but still somewhat substantial — good for a summer sweater. What is really unique about it is that the reverse side is smooth. So I used the revers for the bands and had smooth, perfectly color matched bands. I was inspired to use the impressionist knit for my cardigan after seeing another sewist used it to for a Harper cardigan hack in the eucalyptus color. I have some of that color as well and may try that hack too.

Since I bought more of the impressionist fabric than I needed, I decided to make a short-sleeve sweater to match my cardigan and turn it into a twinset. I used the Sinclair Cachet t-shirt pattern in size 4P, but used my Bondi screwp neckline hack instead of the Cashet crew neck. I used the reverse side of the impressionist fabric for the neck band. The Cachet is only two pieces plus the neckband, so it is very fast to cut (especially with a projector) and sew. I like the high-low hem that is longer in the back than the front.

The impressionist knit was pretty easy to work with, but almost impossible to remove stitches from if you mess up (well most knits are difficult to unsew, especially if you sew with stretch or zigzag stitches). I used HeatNBond Soft Stretch for all my hems on the top and cardigan and it worked great, producing crisp edges on the curves. The impressionist knit also washes well and goes in the dryer. Since it is a fairly loose knit on the front it does sometimes catch on things and I expect over time to see some loose threads and pilling. I’ve been wearing the twinset to work a lot and the cardigan is a good weight to wear when it is 69 degrees and air conditioned inside and much warmer outside.