I love the Sinclair Bondi tshirt pattern, and have previously used it to make long-sleeve scoop neck and screwp neck versions, as well as bishop-sleeve versions, and even a wool sweater. I think I’ve made at least nine Bondi’s previously. It’s summer, so I’m mixing it up now with some short sleeve variations.
I ordered a few colors of cotton Lycra to have on hand, and my daughter spotted the sage fabric and requested a cropped short-sleeve tee. I made this one in a size 4R but graded the waist to a size 0 and cut the bottom at the horizontal waist line shown on the pattern. In hindsight I probably should have cut it a half-inch longer, so I ended up sewing about a 3/8-inch hem rather than my usual 5/8-inch t-shirt hem. Actually, she probably wouldn’t have cared if I hemmed it shorter, as it does seem to be what everyone her age is wearing. I used the crew neck and cut the sleeves about an inch shorter than the short-sleeve length marked on the pattern. It seems to be exactly what she wanted.
![](https://lorrie.cranor.org/blog/wp-content/uploads/2024/06/DSCF1906-683x1024.jpg)
![](https://lorrie.cranor.org/blog/wp-content/uploads/2024/06/DSCF1896-683x1024.jpg)
![](https://lorrie.cranor.org/blog/wp-content/uploads/2024/06/DSCF1903-683x1024.jpg)
I didn’t have enough black Pylos Liknit fabric for another pair of palazzo pants (my daughter is wearing the last pair of black LiKnit pants I made in the photo above and would desperately like me to make her another pair when it restocks), but I had enough for a Bondi. I made this one with a screwp neck and elbow sleeves in a size 6P. The Liknit has only horizontal stretch so you can see some lines at the side of the bust, but it still fits pretty well and is very lightweight and comfortable to wear. It looks great with my black LiKnit pants and also these LiKnit pants in the linen colorway.
![](https://lorrie.cranor.org/blog/wp-content/uploads/2024/06/DSCF2079-683x1024.jpg)
![](https://lorrie.cranor.org/blog/wp-content/uploads/2024/06/DSCF2074-683x1024.jpg)
![](https://lorrie.cranor.org/blog/wp-content/uploads/2024/06/DSCF2070-683x1024.jpg)
Finally, I used some light-weight, wide-rib poly-spandex in a groovy print that I bought on $3/yard clearance from Mily Mae Fabrics last year to make a short-sleeve screwp-neck Bondi in size 6p that pairs perfectly with my seafoam LiKnit pants.
![](https://lorrie.cranor.org/blog/wp-content/uploads/2024/06/DSCF2561-683x1024.jpg)
![](https://lorrie.cranor.org/blog/wp-content/uploads/2024/06/DSCF2555-683x1024.jpg)
So now I’m up to 12 Bondis and I’m sure there will be more! I still need to try the V-neck version… perhaps I will try that next.