I’ve spent the past few months pondering back and shoulder adjustments and trying them out. While making my first Wanderulst dress I realized I needed a swayback adjustment to remove the extra folds of fabric at the back of my waist. But I also noticed that my shoulders slope down quite a bit so I tried a sloped shoulder adjustment as well in my second and third Wanduderlust dresses.

I also noticed that my Sinclair Bondi t-shrts and sweaters didn’t look as good in the back as they did in the front. Here’s one that I made recently in size 6p from rayon/poly/spandex plum sibley brushed sweater knit from Surge Fabrics. The fabric is super soft and stretchy and it fits reasonably well but you can see some minor issues in the back.

Then I made a Bondi sweater with the sloped shoulder adjustment from a washable wool with only about 25% stretch. I noticed that I have more significant drag lines under my arm pits in the back, probably due to the fact that this fabric is not very stretchy. I posted photos in one of the online sewist Facebook groups and someone pointed out to me that my shoulders are both sloped and broad. I set up my cell phone behind me transmitting its camera image to my laptop so I could study my back, and tried on a bunch of different tops and jackets so I could see what was going on.

I made a Bondi t-shirt in size 6p with both sloped and broad shoulder adjustments (and bishop sleeves) from an aqua wide lush poly-spandex fabric from Mily Mae. This was better, but the drag lines were not completely gone.

After studying the black ponte Onyx blazer I made a few months ago, I eventually noticed that the top of the shoulder seam was not actually at the top of my shoulder and had a tendency to slip down my back. I realized that when I pulled my shirt or jacket forward to get the shoulder seam where it belonged, it tended to bunch up around my neck. And this is why I find it uncomfortable to wear most jackets with collars! I thought perhaps what I needed was a forward shoulder adjustment, which involves basically taking the top of the shoulder from the front pattern piece and moving it to the back. I went into Affiinty Designer and moved an inch of the Bondi tshirt pattern (already adjusted for sloped and broad shoulders) from the front to the back and cut out another tshirt. I didn’t take a photo, but the results were not great.

I decided to stick with the sloped and broad shoulder adjustment for my next Bondi in size 4p, made from purple (looks like magenta) monaco rib poly/rayon/spandex from Mily Mae. I think it came out pretty well, despite some minor back issues. I think I’m done adjusting the Bondi for now.